Hello, welcome to the official website of Hefei Kaxing Digital Control Equipment Co., Ltd.
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 57 Author: Site Editor Publish Time: 2020-02-11 Origin: Site
In order to keep the parts of the engraving machine in good condition all the time, it is very important to adhere to regular maintenance. Many hidden troubles can be eliminated in the bud to prevent vicious accidents. The requirements for daily maintenance of different types of engraving machines are not exactly the same, but generally include the following aspects:
Maintain a good lubrication state, regularly check and clean the lead screw, add or replace grease and oil, so that the moving parts such as the lead screw and nut are always kept in a good lubricating state to reduce the wear rate of the machine.
Machine maintenance list
| Serial number | inspection cycle | Check parts | Inspection requirements |
| 1 | every day | Carving machine table | Clean up the countertop |
| 2 | every day | XShaft dustproof paper | Keep dust paper moving smoothly |
| 3 | every day | Connect the cables | Check whether the cables are plugged tightly and whether they are damaged |
| 4 | every day | control box | Check the control box fan for wind |
| 5 | weekly | XShaft screw | Open the dustproof paper and clean the lead screw. |
| 6 | weekly | YShaft screw | Grease after cleaning the lead screw |
| 7 | Irregular | Check computer antivirus | Defragment in time |
| 8 | per month | ZShaft screw | turn onZShaft dustproof paper, refuel after cleaning the lead screw |
| 9 | Irregular | Screw nut | Check the screw of the screw |
| 10 | Half a year | Floating spindle | Check the motor carbon bolt |
2. Maintenance of computer and control box
If the computer and control box are too dirty and dusty, it will affect the normal operation of the engraving machine. Too much dust in the computer box may burn out the computer interface card, making the control panel unusable; the control box is too dirty, and a short circuit may burn the driver. It must be cleaned regularly to keep the motherboard and all kinds of cards ventilated and dry.
Third, the maintenance of the spindle motor
In order to enable longer and more stable use of the spindle motor, the following points should be noted:
1． Refuel regularly to keep the bearings lubricated.
2． No water should enter the motor.
3． Keep bearings clean.
Do not work for a long time under the condition of high speed and strong resistance.
